Since your latest mmjoy firmware can use LED,can you give me some ideas what the LED is used for?
Originally Posted By: Sokol1
You can use LED to monitor switch's state...
Sokol1, it is mistake, now LEDs don't have this features. manual controlling LED from tool "LEDControl.exe". now started work to make driving LED state from WarThunder data(indicate gears, flaps...). and again, mmjoy work only with strip "WS2811 RGB LED" 10pcs, not regular or any other type of LEDs.
Originally Posted By: Brandano
An alternative could be to have a separate microcontroller dedicated to the handling of outputs, including perhaps driving a few servos for panel gauges.
I don't have planes to do this. If you want "outputs" check controller "F2"/"F3" from author "Kreml". link to russian forum
Originally Posted By: arnsk98
When using the "2 joysticks-1 card" function, both virtual joysticks appear in the Control Panel with the same name, how can I change the name of at least one of them?
you cannot switch secondary joystick to another name.
Originally Posted By: arnsk98
Also, there's something funny with the enumerator in JoySetup.exe (box below the "Donate" button). After configuring 2 axis, it says "Used axis: 3". with 4 axis, it says "Used axis: 10". O_o?
