Originally Posted by Slarti
Hey Forsaken,
I'm using the Arudino Micro by RobyDyn. Pinouts for the Mega TQS are attached.



On the Micro VIN is Power 2 or VCC ( same as on the Leonardo, which I am using) ...I use it for the SR Board. and have the Pots off the 5V (RAW) Power

I see on you Pin-out you have 3 wired the Pots as needed......

The hidden connection threw me off at 1st too , that why I asked about it , as the switch and the push button need separate wiring

Last edited by Kbird; 03/12/19 01:47 AM.
My FLCS+TQS Conversion here on SimHQ

http://simhq.com/forum/ubbthreads.php/topics/4324940/1