Second Monitor, Yes.
Exporting an MFD has a few requirements I wasn't aware of.
_________________________________
1. The MFD monitor has to be the Windows #2 monitor, it has to be to the RIGHT of monitor #1 in the Windows config, and the top edge of the two monitors have to line up. Once I met these criteria, the MFD screens would export.
2. The X-axis values for the exported screens work just fine, the Y-axis values do not.
3. The Y-axis has some scaling issues. I ended up using an mfd_screen_height of 1500 (not 768 to match the monitor) to get the Text to scale correctly without getting cut off here and there. That gave me about 256 pixels in height for the actual image on the MFD and the text on all screens looks nice and clear.
My final values are as follows:
export_mfd=1 # enables MFD export on multimon systems (0 = off, 1 = on) (def = 0)
export_mfd_adapter=0 # graphic adapter for MFD export screen (0 = first, 1 = second, ...) (def = 0)
export_mfd_screen_width=1366 # resolution of export screen (n = pixels horizontally) (def = 640)
export_mfd_screen_height=1500 # resolution of export screen (n = pixels vertically) (def = 400)
export_mfd_left_pos=0,30,590,291 # left MFD position (def = 0,0,256,256)
export_mfd_right_pos=770,30,1366,291 # right MFD position (def = 384,0,640,256)
export_mfd_single_pos=770,30,1366,291 # single MFD position (Havoc, Hind and Black Shark only) (def = 0,0,256,256)
Last edited by Javelin; 06/07/21 06:44 PM.
