homepage Forums Technology Flight Sim Pit Builders FreeJoy - Firmware for STM32 boards for joystick controller

FreeJoy firmware for joystick controller, by WG_Magners - similar to MMjoy2 and EasyJoy32One
​
Hardware required: ARM STM32, example > $10 - STM32F103C876
 


FreeJoy firmware supports following features:

Up to 8 analog axes (12 bit resolution - 4096 points)
Up to 128 buttons (Wired though Matrix or Shift Register)
Incremental encoders
TLE5010/5011 sensors (digital bus instead analog like potentiometer and conventional Hall sensor)
Shift Registers 74HC165 and CD4021
Axes to buttons (12 buttons per axis)
4 POV hats
Push buttons, toggle switches, inverted buttons, etc.
 
All this options can be configured by user-friendly configurator tool - FreeJoy Configurator:


Note: FreeJoy Configurator require MS NET Framework 4.5.1 installed.

Instructions on how use FreeJoy Configurator:
 
For flashing firmware to ARF STM32 device an ST-LINK v2 programmer is required (or USB-UART converter). Example.

Instructions how to flash firmware to the device can be found on Github wiki page. https://github.com/vostrenkov/FreeJo...ickstart-guide

Source code can be found on Github: https://github.com/vostrenkov/FreeJoy/wiki

FreeJoy firmware: https://github.com/vostrenkov/FreeJoy:
FreeJoy Configurator tool:
 

Links to the latest releases:
https://github.com/vostrenkov/FreeJoy/releases


FreeJoy is free use under GPL3.0 license, can use it in your commercial projects for free, keeping the code open.

Autor: WG_Magners
===================================================================================================================

Topics in il2sturmovik forums:
English: https://forum.il2sturmovik.com/topic/57900-freejoy-opensource-joystick-controller-on-stm32/
Russian: https://forum.il2sturmovik.ru/topic/12818-freejoy-opensource-joystick-controller-on-stm32/
​

This is awesome! Thanks for the info Sokol1!

g.

FreeJoy development get over quickly.

Now support external ADC's and new tipe of contactless sensor, like AS5600 (programable working angle) and MLX90333, and features like "radio button sequential".


Instructions are available on wiki of github page of the project:
https://github.com/FreeJoy-Team/FreeJoyConfigurator/wiki
https://github.com/vostrenkov/FreeJoy/wiki