|
|
Joined: Dec 2016
Posts: 456
Member
|
|
Member
Joined: Dec 2016
Posts: 456 |
I have some of these for another Conversion I am planning but have not done yet , the switch on them is for use with MMJoy2 OR EJoy32 Firmware and Boards which use a different ground (High/Low) than Arduinos like the ProMicro or Leo. Mine came as part of a package deal with the TLE5010 boards and a STM32 EJoyV3 board from New Hope Store too...Tammy (Owner) was fairly easy to deal with even with the language barrier and gave me a better price for multiples. I paid for Shipping with the "via HongKong" addon ($2) and it proved to be much faster than the 1st shipment (but I'm not in the US)
Last edited by Kbird; 10/17/18 08:54 PM.
|
|
|
|
|
Joined: May 2016
Posts: 55
Junior Member
|
|
Junior Member
Joined: May 2016
Posts: 55 |
 that's not the point. I just wanted to know if it's possible raw output of the TLE5011
|
|
|
|
|
Joined: Jul 2018
Posts: 20
Junior Member
|
|
Junior Member
Joined: Jul 2018
Posts: 20 |
I have some of these for another Conversion I am planning but have not done yet , the switch on them is for use with MMJoy2 OR EJoy32 Firmware and Boards which use a different ground (High/Low) than Arduinos like the ProMicro or Leo. Reading your comment, I'm a bit unclear. Does that mean it will or will not work with a ProMicro? I have a ProMicro clone I'm planning on loading with mmjoy2, and I'd like to make sure this shift register kit would work with it.
Last edited by StarfuryTH; 10/18/18 01:04 PM.
|
|
|
|
|
Joined: Nov 2001
Posts: 3,960
Senior Member
|
|
Senior Member
Joined: Nov 2001
Posts: 3,960 |
I have a doubt and I'm sure someone can help me. In my flight lever I tried to make the z axis (yaw) with return to the zero point. I have tried with several types of springs and designs (scissors type) etc..
but in the end the use ends off center. If you have disassembled some joystick with z axis, as they usually do, use some kind of special spring?
Commercial joysticks use an torsion spring in their twist axis mechanism, in a very "meh" implementation. Spring similar to this: https://www.grainger.com/product/GRAINGER-APPROVED-90-Degree-Carbon-Steel-Music-3HPN5In this topic are detailed pictures of Ravcore Javelin (VKB Gladiator OEM version) internal parts. ![[Linked Image]](https://forum.il2sturmovik.ru/uploads/monthly_09_2016/post-12288-0-12922100-1475149128.jpg) https://forum.il2sturmovik.ru/topic/4898-ravcore-javelin-gaming-joystick/
|
|
|
|
|
Joined: Nov 2001
Posts: 3,960
Senior Member
|
|
Senior Member
Joined: Nov 2001
Posts: 3,960 |
I have some of these for another Conversion I am planning but have not done yet , the switch on them is for use with MMJoy2 OR EJoy32 Firmware and Boards which use a different ground (High/Low) than Arduinos like the ProMicro or Leo. Reading your comment, I'm a bit unclear. Does that mean it will or will not work with a ProMicro? I have a ProMicro clone I'm planning on loading with mmjoy2, and I'd like to make sure this shift register kit would work with it. This New Hope "Shift Register board with 74HC165 ic board is made for their "Mjoy" joystick controller based on ATMEGA32u4 and using MMjoy2 firmware or "Ejoy" based on STM32 (ARM). No reason for that Shift Register board for don't work in DIY Arduino PRO Micro MMjoy2 assembly, unless non compatibility of JS3 plugs in cables, what is easy to replace.
|
|
|
|
|
Joined: Jul 2018
Posts: 20
Junior Member
|
|
Junior Member
Joined: Jul 2018
Posts: 20 |
Fantastic, just making sure 
|
|
|
|
|
Joined: Dec 2016
Posts: 456
Member
|
|
Member
Joined: Dec 2016
Posts: 456 |
I have no reason to think they won't work, in fact it should be far easier that making my own as I did last time....and it was Cheaper by the time you add a PCB , Chips, chip holders etc , but these were not available when I did my 1st FLCS/TQS 12-18mths ago.
KB
|
|
|
|
|
Joined: Dec 2017
Posts: 27
Junior Member
|
|
Junior Member
Joined: Dec 2017
Posts: 27 |
Hey guys quick simple buy still hard question, how to mount different switch onto this ? ![[Linked Image]](https://i.postimg.cc/dQSzhZ4n/HAT1.png) ![[Linked Image]](https://i.postimg.cc/GtNNV6H6/HAT2.png) ![[Linked Image]](https://i.postimg.cc/0QVhdzxk/HAT3.png) any ideas?
|
|
|
|
|
Joined: Dec 2016
Posts: 456
Member
|
|
Member
Joined: Dec 2016
Posts: 456 |
Perhaps make PCB round? (or remount switch on round PCB , same size as hole where tac switches are now .....maybe hard to center switch though.
maybe depend on button being used too ?
|
|
|
|
|
Joined: Dec 2017
Posts: 27
Junior Member
|
|
Junior Member
Joined: Dec 2017
Posts: 27 |
Srry forgot to say the last switch is a 4 way hat switch already... lol
|
|
|
|
|
Joined: Mar 2015
Posts: 51
Junior Member
|
|
Junior Member
Joined: Mar 2015
Posts: 51 |
Thanks Sokol1, ya have a torsion spring of a door. the diameter is 24mm so i bought plumbing components to see if you can do something similar
Last edited by Sak75; 10/19/18 12:11 PM.
|
|
|
|
|
Joined: Dec 2017
Posts: 27
Junior Member
|
|
Junior Member
Joined: Dec 2017
Posts: 27 |
You can theoretically make your own single layer PCB but be careful with the Chemicals used , there are many tutorials online now like at Sparkfun https://www.sparkfun.com/news/2116In the MMJoy2 Folder you will find the PCB Folder with some example .Lay6 files which can be opened with Sprint Viewer .....Sprint Viewer (not Demo) will allow you to Print them to PDF, I used them to make my own Shift Register Boards with 2x 74HC165chips but I just used ProtoBoard for them , I didn't etch my own. Note that different MMJoy2 Firmwares come with different PCB examples and not all of them are 100% correct. The Magnets need to be Diametrically magnetized , 6 or 8mm round will work slightly larger if it has a hole in the middle for mounting. If you buy the TLE Boards from AliExpress, they come with the magnets. Most of this Info is in the Thread too, especially from when I started my 1st Conversion and had all the same questions , I think I started here about page 119 .... Magnet info page 138=142 ? KB. Is the magnet 4mmx0.2mm?
|
|
|
|
|
Joined: Dec 2016
Posts: 456
Member
|
|
Member
Joined: Dec 2016
Posts: 456 |
[quote=Kbird][quote=JJCTHMFS][quote=Kbird][quote=JJCTHMFS
The Magnets need to be Diametrically magnetized , 6 or 8mm round will work slightly larger if it has a hole in the middle for mounting.
Is the magnet 4mmx0.2mm? The ones that came with my TLE5010 Boards are 3.5mm dia. x 2.5mm thick. ( maybe called 4mm dia. x 3mm thick?) But I also have 6mm x 6mm x 6mm cubes magnets too 0.2mm is like the thickness of 2 pieces of paper See pages 138-142 or the thread KB
|
|
|
|
|
Joined: Dec 2016
Posts: 456
Member
|
|
Member
Joined: Dec 2016
Posts: 456 |
Last edited by Kbird; 10/22/18 05:09 AM.
|
|
|
|
|
Joined: Nov 2016
Posts: 44
Junior Member
|
|
Junior Member
Joined: Nov 2016
Posts: 44 |
Hi Kbird! About magnets: Doesn't need to be Diametrically magnetized. Diametrically magnetized is much more expensive. In my first project ( suncom F-15 new gimbal ) I use flat cilinders 5x2mm non diametrically magnetized. I use two flat cilinders in each axis. In ebay: neodymium magnets In my second project ( DIY BRD ) I use 5X5mm cubes. In ebay: neodymium cubes Both cases work fine. The important thing is to position both poles in front of the sensor. Hi JJCTHMFS! As mentioned by KBird, you can do the TLE PCB by yourself, as I do. Do you live in Argentina? I assume you speak spanish hermano. Usted puede hacer por tu mismo, pero requiere mucha paciencia e alguna habilidad en hacer e soldar los componentes. E tiene que trabajar com material corrosivo, asi que es bueno investigar mucho antes de hacerlo.
Last edited by AIRWOLFMUTLEY; 10/23/18 12:49 AM.
|
|
|
|
|
Joined: Dec 2017
Posts: 27
Junior Member
|
|
Junior Member
Joined: Dec 2017
Posts: 27 |
What does the community think about this gimbal? as it looks a lot like the VKB and the WARBRD https://github.com/o-devices/o-joystick-hdk I can use the 3D printed pices and cast them or use them to cut metal parts for the final product https://youtu.be/H3n42BAMKc0
Last edited by JJCTHMFS; 10/26/18 03:14 AM.
|
|
|
|
|
Joined: Dec 2017
Posts: 27
Junior Member
|
|
Junior Member
Joined: Dec 2017
Posts: 27 |
Gracias, ya aprendi bastante! !estoy buscando un diagrama con las resistencias y como armar todo, ya que es la primera vez. y aca en Mendoza, es todo mucho mas dificil de conseguir.* o tarda jeje
|
|
|
|
|
Joined: May 2016
Posts: 36
Junior Member
|
|
Junior Member
Joined: May 2016
Posts: 36 |
Can you have two hardware buttons activate the same software button on release?
Example being an on (button 1)-off-on(button 2) toggle switch, with the release of either button 1 or button 2 automatically triggering a button 3. (that isn't available on the actual switch's off position)
|
|
|
|
|
|
|
|
|
|
|
HOA's
by Terl9999 - 09/18/26 04:12 AM
|
Football
by Terl9999 - 09/18/26 02:42 AM
|
Flags
by Terl9999 - 09/15/26 10:03 PM
|
|
|
|
|
|
|
|
|
|
