homepage Forums Technology Flight Sim Pit Builders MMJoy/MMjoy2 - Set your own USB controller with a cheap Arduino

this is DeadZone LOW + DeadZone High ?

Yes, looks like "Saturation" - Min and Max - in DView is equals DeadZone Low and High.

Both limit the axis response in ends of axis course.

hello I leave a video of my diy joystick but even this process works, is totally handmade pieces unused old joystick.

https://www.youtube.com/watch?v=oLX2eLNLtbk

can you make fotos of your grips (stick and throttle)? and what is it material made?

Sak75,

Well done, nice "Franken'stick".

I'm big, It's a franken'stick for my frankenhand

Hi mega, photos in a few days, material: wooden and epoxy putty (like milliput) this putty can be model like clay and when is dry you can cut, sand and paint.

What gimbal do you have?

Looks the gimbal is DIY with ball bearing and 4 expansion springs.

I need some help!
And as you guys are very clever and creative I thought this was the perfect place to ask.

I am revisiting my g940. I plan on some further improvements to my wiring etc.

On the g940 there are various "white plugs" of different pin sizes. Does anybody know specifically what kind of plugs these are? Are they custom made for logitech or some Picoblade or MicroJst type?

I have a bunch of 2.54mm XH plugs of varing pin sizes, they're close but not the right size.

Here is a picture (not mine, borrowed from the internetz). Does anyone know what they might be?

Hello i made a photo with the cell, and i made a small plane of the joystick. in a few day photos and a plane of the throttle.

Sak75
WOW

a device for accurate fine-tuning ?

Ja ja ja. of course.

I am trying to find information on how rows and columns for buttons are determined in MMjoy2. I am trying to get a button to work with a teensy2 where the button is on pin D2 and B5.

In MMjoy2 what determines which is the row and which is the column? Does it matter?

I have tried multiple combinations and none has worked. Below is what I have now. The Pot works, he button does not.

Thanks in advance for responses.

zenPanda
1) do you apply settings with button "save sets to device"?
2) remove diode and button, just check B5+D2 connect/disconnect? (maybe you have broken diode/button)

mega_mozg_13

Thanks for the suggestion. I shorted the pins directly and finally got some life from the indicator. I should have thought to try this, but was convinced it was something I was doing wrong in the software.

Thanks for your help...and for this great piece of software! I look forward to seeing how much I can accomplish with it.

Looks the diode in this lay are in wrong direction, need be toward the switch, not the controller.

http://deadfrogstudios.com/warthogpit/im...atrixSchema.png
http://api.ning.com/files/-lcw-RpPXUOoP1...IFwT6T/MJOY.jpg

Hi mega_mozg_13,

yesterday i tried the new version MMJOY2 [v20151118] with my 3 pedal setup.

i flashed the new firmware
now there is i think your old setup.

i made my setup and saved the data. after rebooting the usb device is gone. even using another usb slot did not help.

i reflashed the older version.

Bosk666, no fotos and no screenshots. not possible to replicate trouble. how I can help to you?

hello, again i tried the firmware update. this time everything is fine.
i don�t know what was happening last time.