homepage Forums Air Combat & Civil Aviation Wings: Over Flanders Fields Wings: Over Flanders Fields - Technical Issues Mixture axis?

Mixture Control (1 to 4) is present in Bind to Axis and it is bindable in the GUI similar to Bank, Pitch, Rudder etc. However it does not work in the game. Did anybody succeed in using mixture on a joystick's axis?

Thanks,
Dirk.

Yes on all my controllers..

HTH

WM

WM, now it works here too. I had it on a slider axis and it didn't work in the game (slider is CHManager's thingie). Now I've changed it to a normal axis and it works.

Thanks,
Dirk.

I assigned the Fighterstick Throttle Axis (it's the slider on left side of base) to Slider 1 in CH Control Manager, and it worked fine. Were you using mapped mode?

Yes, I was using the mapped mode, perhaps something went wrong, too many input devices here. However it works ok now with the axis assignment.

Dir.

I found that it worked well when I limited it X, Y, Z Axes, Slider 0, & Slider 1 all mapped to CM Device 1.

After a large amount of trying, I just cannot get Mixture Control to bind to the Z Rotation lever of my Cadet Flight Controls. It worked fine on the previous version of OFF.

Under Section 12, B.Setting Up Controllers, the problem arises immediately when I am asked to choose a setting from the "Bind to Axis" menu. There are 4 choices seemingly available:

Mixture Control 1
Mixture Control 2
Mixture Control 3
Mixture Control 4

Which one do I select?

As an example I have tried selecting each one in turn. Mixture Control 1 displays the Reassign Binding window:

Mixture Control 1 on : Cadet Flight Controls

Move the Joystick Axis that you want to bind to : Mixture Control 1

I can move the lever seemingly forever but nothing happens ... except that the Rz Axis display in the top middle box of the Cadet Flight Controls section moves between 11 and 10000 as I move the lever. Does the fact that it won't go to zero have something to do with the problem?

I can hit Cancel and cycle through 2 and 4 Mixture Control with the same effect or, I should say, lack of any.

Anybody any ideas?