Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
Page 1 of 4 1 2 3 4
#2133574 02/09/07 12:06 AM
Joined: Dec 2002
Posts: 361
T
TwoLate Offline OP
Member
OP Offline
Member
T
Joined: Dec 2002
Posts: 361
Anybody running Lomac in Vista 64 bit?

Thanks

Inline advert (2nd and 3rd post)

TwoLate #2133601 02/09/07 12:22 AM
Joined: Oct 2003
Posts: 73
T
Junior Member
Offline
Junior Member
T
Joined: Oct 2003
Posts: 73
I'd almost bet starforce won't work on vista.

Joined: Feb 2007
Posts: 260
B
Member
Offline
Member
B
Joined: Feb 2007
Posts: 260

Last edited by Broadjumper; 02/09/07 12:51 AM.
Joined: Sep 2006
Posts: 9,156
D
Hotshot
Offline
Hotshot
D
Joined: Sep 2006
Posts: 9,156
I haven't installed LOMAC/FC yet. Just did my Vista 64 bit install last night. I am liking it so far and will install LOMAC/FC on Saturday morning.

Edit: I am more worried about modman working.


Life is tough. Life is tougher when you are stupid. - John Wayne
Joined: Feb 2002
Posts: 415
H
Member
Offline
Member
H
Joined: Feb 2002
Posts: 415
I have LockON:FC installed on Vista Ultimate and running better than it ever did on XP pro. I get more FPS on the same exact system. To confirm this to others, I have this installed on a Sager Gaming Laptop in a dual boot configuration. 1st OS is still XP Pro with LockOn:FC and 2nd OS is Vista Ultimate. Going back and forth, I can say 100% that on this particular system, LockOn runs better on Vista than on XP. It may be the new ATI drivers for the ATI Mobility 9700 Pro (256Mb) video card just make it run faster, but I get better fps with higher settings in Vista than XP.

Not saying for everyone to go out and test Vista, but it works for me incredibly. RealVNC works faster as well on Vista.

FYI: for those about to try it, remember to right click the exe before install and run in compatibility mode for XP SP2, and as administrator. Then run the install for each cd in sequence doing this for the exe's. Then you have to download the starforce update tool when it asks you to the first time you try to start FC. Dont forget to install updated video drivers for your cards. Some beta nVidia drivers are having issues ( thus the word 'beta'), the ATI ones seem to work real well.

Last edited by H4rM; 02/10/07 06:05 PM.
H4rM #2135501 02/11/07 06:59 PM
Joined: Sep 2006
Posts: 9,156
D
Hotshot
Offline
Hotshot
D
Joined: Sep 2006
Posts: 9,156
When you run the starforce update tool, does it ask or do I need to go to the starforce website to download it prior to this?


Life is tough. Life is tougher when you are stupid. - John Wayne
Joined: Feb 2002
Posts: 415
H
Member
Offline
Member
H
Joined: Feb 2002
Posts: 415
When you first try to run it in Vista, a warning dialog box will pop up with a link in it that takes you to their site for a file named sfdrvup.zip

H4rM #2135940 02/12/07 05:40 AM
Joined: Dec 2002
Posts: 361
T
TwoLate Offline OP
Member
OP Offline
Member
T
Joined: Dec 2002
Posts: 361
Thanks all for the support.

TwoLate #2136164 02/12/07 02:38 PM
Joined: Apr 2002
Posts: 17,733
J
Joe Offline
Veteran
Offline
Veteran
J
Joined: Apr 2002
Posts: 17,733
This is important stuff. I'm making this thread a sticky.

Joe #2136842 02/13/07 12:54 PM
Joined: Feb 2002
Posts: 415
H
Member
Offline
Member
H
Joined: Feb 2002
Posts: 415
For those that may have problems running it, once installed. On another yet weaker system, I found that turning off the sidebar in Vista allowed normal gameplay.
The Sager Gaming Laptop still plays it very nicely. I installed Loman and Modman using the same compatibility techniques with some mods. No fps mods, just added some skins.
As a reference, this 2 yr old laptop is a 17" wide, P4 3Ghz (full desktop cpu) w HT, 2Gb of ram, ATI Mobility Radeon 9700 w 256Mb of ram, and dual 60Gb hard drives in Raid-0.

Last edited by H4rM; 02/13/07 12:55 PM.
H4rM #2137618 02/14/07 09:24 AM
Joined: May 2006
Posts: 113
F
Member
Offline
Member
F
Joined: May 2006
Posts: 113
I have no doubt that LOMAC or most games hardware-hungry-games run very fast on Vista. That is not due to better management, though, but by overall signal degradation. The display output is will be reduced by more than 50%, then blown up again, to lower signal-rates.

Very nice read about vistas structure:

http://www.cs.auckland.ac.nz/~pgut001/pubs/vista_cost.html

Joined: Dec 1999
Posts: 6,779
E
XBL: LanceHawkins
Hotshot
Offline
XBL: LanceHawkins
Hotshot
E
Joined: Dec 1999
Posts: 6,779
That link is just about Content restricted High Definition Video, ie HD-DVD/Blu-Ray type movies. Not for gaming purposes.

Joined: May 2006
Posts: 113
F
Member
Offline
Member
F
Joined: May 2006
Posts: 113
Sorry, posted the wrong link then - same is true for all input-output-systems. I'll try to look up the other link.

Joined: Apr 2002
Posts: 17,733
J
Joe Offline
Veteran
Offline
Veteran
J
Joined: Apr 2002
Posts: 17,733
Originally Posted By: Capt.LoneRanger
Sorry, posted the wrong link then - same is true for all input-output-systems. I'll try to look up the other link.
I'm waiting, because I seriously doubt that's true.

Joe #2144552 02/22/07 09:20 PM
Joined: Feb 2007
Posts: 969
F
Old fart
Member
Offline
Old fart
Member
F
Joined: Feb 2007
Posts: 969
Well I ran Vista for a couple of weeks and played LOMAC/FC on it no probs at all - I also posted some instructions on installing and running it on LockonFiles - but I'm now back on XP - due entirely to the fact that there is no SST software for the X52 or any other Saitek controllers for Vista.

According to UK Support it should be out within a couple of weeks at the latest - I'll then be immediately reinstalling Vista.


"The way you keep forgeting things, you'd think you'd remember"
- my wife
A
Anonymous
Unregistered
Anonymous
Unregistered
A
I am having issues with Flaming Cliff (the CD version).

The ordinary Lock on installs and run (with nice performance boost to me surprise). But with Flaming cliff i got a c++ error and the programs hangs as soon as you hear audio coming to live.

Running Nvidia 7800gtx. (latest drivers .65 whql)
Vista 32 bit.
Audigy xFi Fata1ty (latest drivers)
AMD 4400+ / 2 GB ram
Starforce update installed.

Someone recognizes my ordeal? \:\)

Tried the solution as above with installing them as admin (given the files admin, and also compatibility).

Frustrating - me bought a Saitek Rudder Pro system today and thought that i for once should master the S25T...

Any ideas at all will be appreciated.

Last edited by Thomas; 02/24/07 05:31 AM.
#2145407 02/23/07 11:51 PM
Joined: Feb 2002
Posts: 513
P
Member
Offline
Member
P
Joined: Feb 2002
Posts: 513
Did you apply the starforce update after installing?

out

PoleCat #2145591 02/24/07 05:33 AM
A
Anonymous
Unregistered
Anonymous
Unregistered
A
Yes i did.

Forgot to mention that. Thanks for the idea though! \:\)

#2145852 02/24/07 06:00 PM
Joined: Feb 2002
Posts: 513
P
Member
Offline
Member
P
Joined: Feb 2002
Posts: 513
I only had to install Lockon 1.0 then FC CD then FC1.12a CD patch. then the Starforce update. I am using the same sound card as you too.

Are you absolutely positive you have the right patch version for your installation?

Out

Last edited by 169th__PoleCat; 02/25/07 02:14 PM.
PoleCat #2146391 02/25/07 07:33 PM
A
Anonymous
Unregistered
Anonymous
Unregistered
A
I had the right patch for LockOn. Used the same files for my XP installation. (Yes i reverted back to XP just to make sure it wasn't any trouble with my CDs and files).

I don't know if is something to do with AMD X2? Something made it impossible to run FC on this computer and VISTA.

#2148650 02/28/07 09:47 PM
Joined: Jan 2001
Posts: 2,222
B
Member
Offline
Member
B
Joined: Jan 2001
Posts: 2,222
The biggest thing vista gives us gamers is how hardware interrupts are handled. Under XP those hardware interrupts had a chance of actually halting or delaying significantly other processing. In Vista this is fixed.


What WW2 Fighter pilots say about Angels and Airspeed:

"Nice job of getting down to the basics - love your choice of a cover!" Col. Clarence 'Bud' Anderson

"I have enjoyed reading angels and airspeed, it should prove good reading for all interested in combat tactics and their application related to the fluid air environment and state of technology in WWII years. All the best as you make it available." - Col. Charles McGee - Tuskegee Airman

NEVER ENGAGE STUPID.
Bard #2157855 03/12/07 07:49 PM
Joined: Feb 2002
Posts: 513
P
Member
Offline
Member
P
Joined: Feb 2002
Posts: 513
FC works much better under vista32 with the latest Nvidia drivers. Alot of the anomilies with transparent graphics etc are now gone. The sound card drivers are still in need of a great deal of work but things are coming along nicely indeed.

Out

Last edited by 169th__PoleCat; 03/15/07 11:02 AM.
#2177851 04/06/07 09:24 AM
Joined: Apr 2007
Posts: 1
L
Junior Member
Offline
Junior Member
L
Joined: Apr 2007
Posts: 1
Originally Posted By: Thomas
I am having issues with Flaming Cliff (the CD version).

The ordinary Lock on installs and run (with nice performance boost to me surprise). But with Flaming cliff i got a c++ error and the programs hangs as soon as you hear audio coming to live.

Running Nvidia 7800gtx. (latest drivers .65 whql)
Vista 32 bit.
Audigy xFi Fata1ty (latest drivers)
AMD 4400+ / 2 GB ram
Starforce update installed.


Any ideas at all will be appreciated.


Thomas

I'm having the same problem as yourself. Did you manage to sort it out and get LO:FC running in Vista?
I'm thinking of going back to XP already and I've only had the system less than 24hrs \:\(

Cheers

Lou

Joined: Feb 2002
Posts: 513
P
Member
Offline
Member
P
Joined: Feb 2002
Posts: 513
OK Guys you need to install flaming cliffs then the starforce update then the 1.12a patch. If you get transparent cockpit issues set visib Rnge to low in graphics options in sim. Also with X-fi card you need to get creative alchemy software to make the audio work right in FC.

I will try to help get you sorted out as I have FC working on 3 systems under Vista32.

Out

Last edited by 169th__PoleCat; 04/06/07 11:40 AM.
PoleCat #2191339 04/24/07 10:13 PM
Joined: Feb 2002
Posts: 415
H
Member
Offline
Member
H
Joined: Feb 2002
Posts: 415
I was noodling around in Vista when I think I have discovered how to get LockOn to look great in it.

Installation:

Prior to installing, right click the setup.exe, go to properties, compatibility tab, and check the boxes for both the Run as Administrator and Run in Compatibility Mode for XP-SP2. Then install by clicking the same setup.exe. (Do this for all other programs for LockOn as well such as Loman, Modman, etc...)

Once it has installed and all of your mods are installed, go the LockOn folder on your hard drive (normally in the C:/Program Files/ Ubisoft/Eagle Dynamics/Lock On/) and find the LockOn.exe file. Right click the LockOn.exe file, go to properties, compatibility tab, and again for this, check the boxes for Run as Administrator, Run in Compatibility for XP-SP2 and also check the box next to "Disable Desktop Composition". This last setting changes the Vista Aero scheme to the Vista Basic mode in effect disabling Aero from Vista. Once you are done flying, Vista will revert back to normal, and then the next time you go to play LockOn, it will change back automatically for you. This has fixed the disappearing cockpit and other graphic problems I had on the nVidia card system with nVidia chipset I have.

H4rM #2191434 04/25/07 12:32 AM
Joined: Apr 2000
Posts: 905
S
Member
Offline
Member
S
Joined: Apr 2000
Posts: 905
I've got it running in 64 bit Vista with TrackIR. Using run in compatabilty mode mentioned above but don't use the 'Disable Desktop Compostion' setting (though gonna try that). Didn't have to update my starforce stuff either (very old and early copy of LOMAC).

I have it patched through 1.02 but trying .03 patch makes it crash.

Now if I could get 1946 to run I'd be happy.

Joined: Feb 2002
Posts: 415
H
Member
Offline
Member
H
Joined: Feb 2002
Posts: 415
Good stuff Steve, I was mainly speaking about for the latest version which is LockOn: Flaming Cliffs with the 1.12a Patch. For this you will need to update the Starforce Driver as well to a Vista one they have on the Starforce site as well to install.
The Disable Desktop Composition mainly disables the Aero scheme so that Flaming Cliffs plays nicely with Vista. No more cockpit disappearing now.

Joined: Apr 2002
Posts: 17,733
J
Joe Offline
Veteran
Offline
Veteran
J
Joined: Apr 2002
Posts: 17,733
Originally Posted By: Steve
Didn't have to update my starforce stuff either (very old and early copy of LOMAC).
That's because LOMAC (v1.00 through 1.02) doesn't use StarForce.

Quote:
I have it patched through 1.02 but trying .03 patch makes it crash.
1.03 patch? There's no such thing.

H4rM #2221311 05/27/07 02:26 PM
Joined: May 2007
Posts: 7
S
Junior Member
Offline
Junior Member
S
Joined: May 2007
Posts: 7
I have Windows Vista Home Premium and after installing the original LOMAC CD, it wouldn't work. So I came on here looking for answers but still unsure what to do to get it working. Any help would be appreciated.


Last edited by screwballs109; 05/27/07 02:30 PM.
Joined: Apr 2000
Posts: 905
S
Member
Offline
Member
S
Joined: Apr 2000
Posts: 905
I had a problem until I installed the patch. I would try that first.

Joined: Jul 2007
Posts: 5
M
Junior Member
Offline
Junior Member
M
Joined: Jul 2007
Posts: 5
Nightmare. No FC.

I've installed Lomac, no problem - works fine.

My Starforce drivers are up to date, so the sf update file reports

I have installed FC using Admin on the install, and running as Admin too, and even trying XP compatability.

I run Lockon.exe and after a short time I get sound, as per the menu screen, but an error message that a C++ runtime has caused a problem - "the application has requested the runtime to terminate it in an unusual way".

I've tried the 1.12B patch - which says it's trying to install the 1.12A patch - and despite downloading it twice, I get "Error 2" and the patch won't install.

I appear not to be the only person with an Error 2 error-msg - but searching everywhere I see no-one replying to those other reporters of error 2 issues.

I imagine the problem is that I'm not patching, so Vista compatibility is no good. But I can't for the life of me work out why the patch program won't play ball.

Any help, pretty please? I had the FC demo working fine, hence this purchase. Nasty that it won't run, on the day I receive it. Ho hum. Any suggestions much appreciated.

Maxhome #2256993 07/12/07 09:48 AM
Joined: Jul 2007
Posts: 9
M
Junior Member
Offline
Junior Member
M
Joined: Jul 2007
Posts: 9
maxhome, I get the same problem :-( did you manage to resolve this ??

cheers

Michael

Joined: Mar 2007
Posts: 102
R
Member
Offline
Member
R
Joined: Mar 2007
Posts: 102
I too have the same problem as michaelk and maxhome when installing Lockon gold. Anyone ever sort this out?

ronster #2257779 07/13/07 07:55 AM
Joined: Jul 2007
Posts: 9
M
Junior Member
Offline
Junior Member
M
Joined: Jul 2007
Posts: 9
got thois working by reinstalling then patching with the gold cd 1.12a from lomacfiles seems to work with vista ?? couldn't get 1.12a to 1.12b

Joined: Mar 2007
Posts: 102
R
Member
Offline
Member
R
Joined: Mar 2007
Posts: 102
Crap. I had the Lockon Gold specific 1.12a patch from the start but the game still crashes. AAAAAARRRRGGGGH!

So is just finally getting the right patch all you did different? Nothing clever you've had to do regarding running with admin permissions or compatibility modes?

ronster #2266901 07/24/07 07:25 AM
Joined: Mar 2007
Posts: 102
R
Member
Offline
Member
R
Joined: Mar 2007
Posts: 102
Just a quick note to add that my problems were sorted eventually. Turns out I had one of the duff FC disks that shipped with Lock On Gold. An email was sent and a free replacement was sent to me (very quickly I might add) and that worked fine once I got it installed. The 1.12b patch also worked correctly with the new disk.

ronster #2325028 08/27/07 01:43 PM
Joined: Jul 2007
Posts: 5
M
Junior Member
Offline
Junior Member
M
Joined: Jul 2007
Posts: 5
Fixed... at last!

Thanks to the Devs, who responded to my pestering emails.

Turns out there are TWO patches for 1.12b Vista compatibility. One for USA, one for UK, Germany etc.

I had the USA one. One download fixed the problem. Only available, as far as I can see, from Lockon.co.uk (I should tell Lockon files about this.)

Also had to disable UAC in Vista, but frankly that does my head in anyway, so am happy without it.

#2355061 10/10/07 09:48 PM
Joined: Oct 2007
Posts: 1
A
Junior Member
Offline
Junior Member
A
Joined: Oct 2007
Posts: 1
Hi!
I´m still confused \:\)
I have Lock on, without FC.
I can´t run it on Vista. What to do? Can I use 1.12b? Or what?
Thanks

Joined: Apr 2002
Posts: 17,733
J
Joe Offline
Veteran
Offline
Veteran
J
Joined: Apr 2002
Posts: 17,733
No, you cannot use 1.12b on a LOMAC install. AFAIK there is no Vista-specific patch for LOMAC.

Joe #2383124 11/20/07 08:59 PM
Joined: Jun 2004
Posts: 855
T
Member
Offline
Member
T
Joined: Jun 2004
Posts: 855
Agramerus, Lomac works just fine under Vista. Just right-click on Lockon.exe and set "run in Windows XP SP2 compatibility mode".

I run Lockon 1.02 without any problem. You do not need a Vista patch. In 1.1/1.12a you need the patch, not for Lockon itself, but for the Starforce drivers. In Lockon 1.01/1.02 there is no Starforce.

Last edited by tflash; 11/20/07 09:01 PM.
#2397488 12/10/07 03:20 AM
Joined: Apr 2007
Posts: 1
S
Junior Member
Offline
Junior Member
S
Joined: Apr 2007
Posts: 1
This might sound goofy, but if you have changed your fonts try changing them back to system fonts. This finally did for me after alot of trying everything mentioned in this thread.

Joined: May 2000
Posts: 2,536
A
Senior Member
Offline
Senior Member
A
Joined: May 2000
Posts: 2,536

To install FlamingCliffs on Vista Home Premium, I too had troubles. But overcame them.
Vista even disabled Starforce after installing Lomac and running starforce.

Then after loading FC and the v112b patch, Vista wouldnt liet me install the libraries Starforce needed when it installs itself. Be sure to be ADMIN when you install Lomac/FC and Starforce. If you can, install under a different partition or drive than Vista. Also, Turning off the User Access Control (UAC) allowed Starforce libraries to get installed (probably under the C: drive where UAC is king). Make sure you re-enable UAC after successfulling installing SF and FC.


AV8R
H4rM #2495656 04/16/08 09:10 PM
Joined: Jan 2007
Posts: 67
V
Junior Member
Offline
Junior Member
V
Joined: Jan 2007
Posts: 67
 Originally Posted By: H4rM
Good stuff Steve, I was mainly speaking about for the latest version which is LockOn: Flaming Cliffs with the 1.12a Patch. For this you will need to update the Starforce Driver as well to a Vista one they have on the Starforce site as well to install.
The Disable Desktop Composition mainly disables the Aero scheme so that Flaming Cliffs plays nicely with Vista. No more cockpit disappearing now.


What is the link to the Vista SF driver? All I could find was SFUpdate.exe and it did not say it was Vista specific. Still doesn't recognize my disk in Vista32, although worked fine in XP. Tried all of the above troubleshooting.

Last edited by vScorpion503; 04/16/08 09:12 PM.
Joined: May 2000
Posts: 2,536
A
Senior Member
Offline
Senior Member
A
Joined: May 2000
Posts: 2,536


AV8R
AV8R #2554092 07/20/08 02:02 PM
Joined: Dec 1999
Posts: 539
T
Member
Offline
Member
T
Joined: Dec 1999
Posts: 539
Hi Guys:

Q: I'm planning on buying LOMAC Gold, does this also apply to it (since it's my understand that the SF version is different)?

Best Regards.....

Joined: Apr 2002
Posts: 17,733
J
Joe Offline
Veteran
Offline
Veteran
J
Joined: Apr 2002
Posts: 17,733
When you buy LOMAC Gold, the LOMAC (1.00, 1.01, 1.02) portion uses SafeDisc. When you install Flaming Cliffs (1.1, 1.11, 1.12, 1.12a/b), StarForce will be installed.

Joined: Jul 2008
Posts: 123
F
Member
Offline
Member
F
Joined: Jul 2008
Posts: 123
Hello everyone,
i am also experiencing problems with Lock On FC under Vista. I bought myself a new PC:
Intel Core2Quad Q9300
Sapphire ATi Radeon HD 4850 512MB PCIe
4096 MB RAM (2x 2048 MB) Corsair XMS2 PC2-800
Seagate 250 GB HDD...
OS: Windows Vista x64 SP1

The problems with Lock On FC also the following: I am always getting CTDs, sometimes along with an error message, sometimes without. Most of the time, this happens in dogfights or generally when there's a lot of action in the game. That's not really funny... \:\(

On my old PC (Athlon 64 3400+, Radeon 9800 XT, Vista x86 --> 32 bit), i did not experience these kind of problems. The game ran of course slower, but stable.

The other problem are graphical glitches:



There are white lines on the marginal sides of the wings and fuselage. These are flickering. That does not really look good. I tried different drivers with my Radeon HD 4850: Catalyst 8.6, 8.7, 8.7 DNA, no change.

Anyone any idea? Do these graphical errors also occur with nVidia cards?

BTW: EECH 1.10.2 also makes problems, just like others described it here: http://www.simhq.com/forum/ubbthreads.php?ubb=showflat&Number=2525979&fpart=3

All other games run fine! I played Call of Duty 4 (great game!) without any problems; Armed Assault works fine, Crysis too.

Last edited by Falcon99; 08/01/08 04:05 PM.
Joined: Dec 1999
Posts: 539
T
Member
Offline
Member
T
Joined: Dec 1999
Posts: 539
Hi Joe:

Thanks for the information!!!. Now I'm feeling better about getting it. I was waiting until somebody answered the question....

Falcon99:

I also get the same white lines. If someone have any idea I will appreciate it.....

Regards;
KC

Joined: Jul 2008
Posts: 123
F
Member
Offline
Member
F
Joined: Jul 2008
Posts: 123
 Originally Posted By: The Punisher

Falcon99:

I also get the same white lines. If someone have any idea I will appreciate it.....

Regards;
KC


Okay, so I'm not the only one. Do you fly with ATi or nVidia? My graphics card is a Sapphire ATi Radeon HD 4850 with Catalyst 8.7.

Joined: Jul 2008
Posts: 123
F
Member
Offline
Member
F
Joined: Jul 2008
Posts: 123

I put up a new installation with Vista x86, and now Lock On FC seems to run fine. At least it did not crash yet.

Joined: Aug 2005
Posts: 284
H
Member
Offline
Member
H
Joined: Aug 2005
Posts: 284
Need help!

I have:
- Intel Core2duo E8400 3.0ghz
- 4gig DDR2 800mhz
- Radeon 4850 with 8.7 catalyst drivers
- VISTA 64Bit ultimate
- Track ir 4 pro
- Saitek X52pro


I get Bsod sometimes in flight, sometimes in menu ect.. \:\(

I try re-install and run as system admin and so on.. NO help \:\( \:\(

After bsod and reboot Vista says that problem is caused by ati drivers. so i back to 8.6 cat but bsod again after 1 mission.

All other games run fine: ARMA, Bioshock , Crysis ....

-esa


I5 8400 , 16gb , GTX 1070 oc , Win10 64bit . Virpil T-50 27" monitor with 2560x1440 rez ... DCS + Oculus CV1 + Samsung Odyssey . (odyssey is better for flight sims)
Joined: Jul 2008
Posts: 123
F
Member
Offline
Member
F
Joined: Jul 2008
Posts: 123
@ EsaHietala: I had the same problem with Vista x64: BSOD or it just kicked me back to desktop. Switched back to Vista x32 and all the problems with Lock On were gone. Like you, i also played ArmA, Crysis, Colin McRae DiRT without any problems in x64.

Joined: Jan 2000
Posts: 1,583
L
Old Guy
Member
Offline
Old Guy
Member
L
Joined: Jan 2000
Posts: 1,583
 Originally Posted By: Falcon99

The other problem are graphical glitches:



There are white lines on the marginal sides of the wings and fuselage. These are flickering. That does not really look good. I tried different drivers with my Radeon HD 4850: Catalyst 8.6, 8.7, 8.7 DNA, no change.

Anyone any idea? Do these graphical errors also occur with nVidia cards?




I too have those lines. My specs are in my sig. I'm running the Catalyst 8.9 drivers. I didn't have these lines before with my Nvidia 8800GT. Must be an ATI thing.


Core i9 10900k @ 5.0GHz
Corsair H115i CPU cooler
Asus ROG Maximus XII Formula
Asus ROG Strix RTX 2080 OC 8GB DDR6
32GB Team T-Force Night Hawk DDR4 3200,
Corsair HX850i 850W PSU
TIR5 With Trackclip Pro
Win 10 x64
Joined: May 2006
Posts: 360
I
Member
Offline
Member
I
Joined: May 2006
Posts: 360
I have those same lines on Nvidia 880GTS on XP


BLAAARRRGG
Joined: Mar 2006
Posts: 82
S
Junior Member
Offline
Junior Member
S
Joined: Mar 2006
Posts: 82
I get those odd lines on mine too, though I'm also having problems installing the 1.12b patch (it keeps trying to put the patch into a different folder, missing some letters from the "e:\Lock On" so it ends up like "e:\Lock O", but there doesn't seem to eb a pattern to it, as I've tried installing LOMAC to lots of different folders over the last few weeks and it seems to miss some letters randomly...)

When I do install it into the strange folder, the game starts, DRM is fine, and I get to the menu screen and Flaming Cliffs looks like it's installed as I have the two SU-25s available. However, when I try to start a quick game from one of the planes icons, it sometimes freezes on the loading page, usually about 1/4 of the way through the loading bar. Sometimes it works, sometimes it doesn't. And it does this when I try any of the planes (again, sometimes it works, sometimes it doesn't).

I'm on a QX9650, DFI UT X48-T3RS, GTX260 (192 core), Auzentech XFi Prelude, Windows Vista Ultimate 64, and all the drivers (sound, mobo, graphics, even firmware for the hard drives etc whenever possible) have been updated. If I can free up some space for a partition I might set up an XP Pro dual boot, and see if things are any different. I've reinstalled *so* many times it's silly.

Sadface =(

e: 18/02/09

I finally installed XP last night, and it seems to have solved at least the freezing on loading problem. I then had the graphical issues with clouds having no transparency on the textures, which was fixed by setting texture settings to "High Quality" in the nvidia control panel. However, I still have the white lines on the edges of the aircraft, like the posts above show. I'll have a look tonight to see what the earliest drivers are that support my GTX 260, and see if there are any that will make a difference.

e ii: Those white flickering lines along the edges appear to be caused by the "Full Shadows" setting. Shadows on "Full Planar" or lower sorts this. Although there's a little less "depth" to the models, I think it's a fair trade off for not having those horrible lines. I don't know if earlier drivers could help for some people; the earliest I can use is 177-178 because any earlier drivers won't support the GTX2xx series of cards.

Everything now seems to work, but I get an exception error on exiting. Nothing too bad, as it doesn't affect gameplay.

Last edited by SquidgyB; 02/18/09 08:43 PM. Reason: update
Joined: Mar 2009
Posts: 5
D
Junior Member
Offline
Junior Member
D
Joined: Mar 2009
Posts: 5
Anyone got any ideas about Runtime errors in 1.12b? I have vista 64 Home Premium SP2 Beta. I was getting them same error before on Vista SP1. Done the install as recommended in previous posts on this thread, to get past StarFarce, but I get this for my trouble: -

Runtime Error!

Program: C:\Eacgle Dynamics\Lock On - Flaming Cliffs\LockOn.exe

This application has requested the Runtime to terminate it in an
unusual way.
Please contact the application's support team for more information.


Just wondered if anyone has a fix before I attempt to contact them?

Cheers

Andy


Vista 64 Home Premium
i7 920
DFI Lanparty DK x58 T3eH6
6gb Corsair 1333 XMS
SoundBlaster X-Fi XtremeGamer
ASUS 8800 ultra

X52 + TrackIR 3 pro
Joined: Dec 2002
Posts: 1,733
S
Member
Offline
Member
S
Joined: Dec 2002
Posts: 1,733
Yeah, me too, what Dr. Strop said.


SpyDoc out cool

My new DigitalStormOnline system:
i5-2500K--8GB Ram--AMD Radeon 6950
Win7--MOMO--MS FFB2--TIR5--27.5" Hanns-G
Joined: Mar 2009
Posts: 5
D
Junior Member
Offline
Junior Member
D
Joined: Mar 2009
Posts: 5
I got this working now. I found the answer on DCS forum.

– If LockOn: Flaming Cliffs returns an error after the StarForce check then disable User Account Control in the Windows Vista.

> Start
> Control Panel
> User Accounts
> Turn User Account Control on or off
> clear the checkbox “Turn User Account Control (UAC) to help protect your computer”
> reboot
> Run the lockon.bat once (it is in the root of the installation)

Forgot to mention. I didn't have the flaming cliffs disk in to run it either.

Last edited by DoctorStrop; 03/07/09 10:40 PM.

Vista 64 Home Premium
i7 920
DFI Lanparty DK x58 T3eH6
6gb Corsair 1333 XMS
SoundBlaster X-Fi XtremeGamer
ASUS 8800 ultra

X52 + TrackIR 3 pro
Joined: Mar 2002
Posts: 336
D
Member
Offline
Member
D
Joined: Mar 2002
Posts: 336
Originally Posted By: Lucky
Originally Posted By: Falcon99


There are white lines on the marginal sides of the wings and fuselage. These are flickering. That does not really look good. I tried different drivers with my Radeon HD 4850: Catalyst 8.6, 8.7, 8.7 DNA, no change.

Anyone any idea? Do these graphical errors also occur with nVidia cards?




I too have those lines. My specs are in my sig. I'm running the Catalyst 8.9 drivers. I didn't have these lines before with my Nvidia 8800GT. Must be an ATI thing.


This is just the known shadow bug. Just turn down shadows from "full" in game settings down one level (to all planar e.g.) and those lines will disappear. The case is that full shadows do not work with modern drivers and old drivers don't work with modern cards:)

Joined: Mar 2007
Posts: 102
R
Member
Offline
Member
R
Joined: Mar 2007
Posts: 102
Is there any bulletproof method of getting FC to install onto Windows 7? I've got the Gold edition and even with the 1.12b patch and the Starforce patch that used to work on Vista then it just gets stuck in the Starforce activation/reboot loop. I hear some people have got it to work and i'm just curious how exactly. I know the FC 2 patch is on the horizon but i'm slightly loathed to pay for an upgrade of a game I only play occasionally anyway.

And to be honest now FC is pretty much a budget title I don't see why they can't just patch to get rid of or tone down the DRM on it anyway.

Joined: Sep 2011
Posts: 4
G
Junior Member
Offline
Junior Member
G
Joined: Sep 2011
Posts: 4
Same here, tried Starforce in compatibility mode and had my total OP system crash and rebooted mad

Joined: May 2010
Posts: 279
F
Member
Offline
Member
F
Joined: May 2010
Posts: 279
LOMAC errors back to desktop constantly when many units are on screen it seems ..

-windows 7 64bit

There needs to be a patch fix for it on windows 7 and 8, if you shot them an email maybe they would consider a patch or at least fixing the problem? So at least one of the game designers would know about it.

It seems ED does only fixes in new releases and once they are out doesn't do much to patch them just continues on with FC versions 2-3 etc.

Last edited by john84; 01/04/14 08:22 PM.
Page 1 of 4 1 2 3 4

Moderated by  Force10, RacerGT 

Link Copied to Clipboard
Quick Search
Support SimHQ

If you shop on Amazon use this Amazon link to support SimHQ
.
Social


Recent Topics
You Expect Me To Fly Without My HUD and MFDs....
by Spidey - 11/02/24 01:26 PM
Teleworking
by PanzerMeyer - 11/01/24 11:44 AM
Does anyone understand this?
by NoFlyBoy - 10/31/24 07:14 PM
Where are Voyager 1 & 2?
by JohnnyChemo - 10/26/24 01:36 PM
1st Canadian VC
by oldgrognard - 10/25/24 11:37 PM
Maps, maps, maps.
by RedToo - 10/23/24 09:08 AM
Popular Topics(Views)
6,532,342 SAM Simulator
Copyright 1997-2016, SimHQ Inc. All Rights Reserved.

Powered by UBB.threads™ PHP Forum Software 7.7.5