homepage Forums Read Only Forums Read Only Forums Jane's USAF (Read Only) dammit, fullscreen=0 does not work! :mad:

hello all,

the fullscreen=0 does not work with me, do you know if there is an other way to achive this or am i not doing the right thing.

after i changed the [render] tgen.ini into blabla=0 then missionscreen stand still, there was not moving anything. i had to press esc. to get in the missionscreen again. in other words i came that far that everything worked fine (i could pull down the menu's and watch my desktop) but when it came to flying nothing more happened.

groet,

arnold

Uhm, I'm not sure I understood what you did arnold, so I'll just go over the procedure and ask you if you did exactly what I'm describing:

1. Open the file "tgen.ini"
2. Find the line "[Render]"
3. DO NOT erase it or in any way change it.

Why - this line declares the beginning of a table with critical data (the lines below this line, until the next line with "[something]")...

4. Add a NEW line directly under the [Render] line, like so:

FullScreen=0

So... Now the render block will look like this:

[Render]
FullScreen=0
DeviceDetect=0
SoundDir=...
CockpitDir=...
3DObjectsDir=...

[Terrain]

5. Save the file, run USAF - and presto!
6. If it doesn't work - are you running some localized version which is not 1.02F?


Best regards to Rosanna...

and hi all,

Well here a serious letter then. I realy tried all to activate the fullscreen option. I have the patch of course version 1.02f. i get a bit uncertain about what is going on now and I need this option to work in a faster way. I noticed that there are several tgen.ini’s. Two with tgen and the rest with Tgen. The first two I examined in a very harsh way. The first is directly located at programfiles/usaf and thats the one I needed I supose. Anyway I’ve checked all posibilities in both tgen’s. this is how it looks now:

[Resource]

Resource=D:\Program Files\Jane's Combat Simulations\USAF\Resource

[Render]

FullScreen=0 (I’ve tried fullscreen, Fullscreen etc. etc.)

DeviceDetect=0

SoundDir=D:\Program Files\Jane's Combat Simulations\USAF\Resource\SoundFiles

CockpitDir=D:\Program Files\Jane's Combat Simulations\USAF\Resource\Cockpits

3DObjectsDir=D:\Program Files\Jane's Combat Simulations\USAF\Resource\3DObjects

[Terrain]

;Still required for the DME, please don't delete.

TerrainStreaming=D:\Program Files\Jane's Combat Simulations\USAF\Resource\Terrain\las-vegas.ptt

[SystemProfile]

DeviceHasAGP=1

DeviceFlags=3628115

CPUSpeed=336

KatmaiCPU=0

SystemMemoryMB=128

RasterSpeed=1269

GeneralRank=970

DoNotFlip=0

But it still doesn’t work.

Let me get one thing clear. The startup of the game is going exactly as you described. The introfilm-files were blurred into one corner. I choose quick mission, I make one and press fly. Now normally the + cursor appears the screen turns black and than you’ll be fading in the game. The only thing that happens is that the + cursor appears and the Missionscreen ( the screen were you can push at the FLY-button) stays in appereance but stop moving. Everything stops from that very moment.

I’ve spend lots of time to find out what I maybe was doing wrong but I could not find anything except: Fullscreen maybe had to appear like FullScreen. But it had no effect at all.


I hope you can help,


Groet,

Arnold