Posted by: tflash
F-16 cockpit view - 01/05/05 09:17 PM
I don't know if any work is still in progress in the viper team?
Anyway, for those flying the F-16 maybe this is a usefull reminder: if you want an uncluttered view from the cockpit without the F-4 canopy struts, you could add this trick once posted by AD if I'm right:
Add following lines in F-16_cockpit.ini under
[CockpitSeat001]
Instrument[076]=MoveCanopyStrut
Instrument[077]=MoveFrontStrut
At the end of the file, below [RWR] section, add these:
[MoveCanopyStrut]
Type=AIRSPEED_INDICATOR
NodeName=FrontFrame
MovementType=POSITION_Y
Set[01].Position=-100
Set[01].Value=0.0
Set[02].Position=-99
Set[02].Value=1.0
[MoveFrontStrut]
Type=AIRSPEED_INDICATOR
NodeName=CanopyFrame
MovementType=POSITION_Y
Set[01].Position=-100
Set[01].Value=0.0
Set[02].Position=-99
Set[02].Value=1.0
This gives you an unparralleled viper-like cockpit view!
Anyway, for those flying the F-16 maybe this is a usefull reminder: if you want an uncluttered view from the cockpit without the F-4 canopy struts, you could add this trick once posted by AD if I'm right:
Add following lines in F-16_cockpit.ini under
[CockpitSeat001]
Instrument[076]=MoveCanopyStrut
Instrument[077]=MoveFrontStrut
At the end of the file, below [RWR] section, add these:
[MoveCanopyStrut]
Type=AIRSPEED_INDICATOR
NodeName=FrontFrame
MovementType=POSITION_Y
Set[01].Position=-100
Set[01].Value=0.0
Set[02].Position=-99
Set[02].Value=1.0
[MoveFrontStrut]
Type=AIRSPEED_INDICATOR
NodeName=CanopyFrame
MovementType=POSITION_Y
Set[01].Position=-100
Set[01].Value=0.0
Set[02].Position=-99
Set[02].Value=1.0
This gives you an unparralleled viper-like cockpit view!